Store

The Scott Aerator Skyward Big Shot 1 1/2 HP fountain creates a breathtaking cascade of flowing water that sounds as beautiful as it looks. The wide, cone-shaped 20-ft. diameter spray surrounds a powerful center column of flowing water. The center spray projects up to 50 feet high and can be easily adjusted for height, making this an ideal fountain for commercial and residential applications. The Skyward Big Shot adds beauty while providing a healthy aquatic environment through high oxygen transfer rates and the large volume of water circulation. The wide, spreading display creates a broad feature that will beautifully fill any lake scene. Fountain uses a stainless steel, oil-free 1 1/2 HP 230V submersible motor that is environmentally friendly, UL listed and CSA approved. Includes 100-ft. 12 gauge power cord. U.S.A. HP: 1 1/2, Volts: 230, Cord Length (ft.): 100, Pattern: Cone, Dimensions W x H (ft.): 20 Dia. x 50, Water Depth Required (in.): 42, Amps: 10.6, GPM: 90 230 Volt 1 1/2 HP oil-free motor Center stream is 50ft. high Mushroom pattern side spray is 20ft. in diameter Pattern height is fully adjustable Brass precision machined nozzle Saltwater approved Designed for continuous operation No maintenance required For ponds 1/4 acre or larger Motor specs: 60 HZ, single phase, 10.6 Amps, 1780 Watts UL listed, CSA approved Includes 100-ft. 12 gauge submersible power cord Requires two 20lb. weights or concrete block for anchoring (weights not included) Requires two nylon ropes for anchoring (ropes not included) Light kits can be added later

The Scott Aerator Clover Big Shot fountain creates an impressive cascade of water that sounds as beautiful as it appears! The brass center nozzle is surrounded by separate side nozzles which create a spectacular angled spray pattern. The main stream will reach heights of 50 feet, while the four side nozzles spray at an impressive diameter of over 20 feet! The Clover not only beautifies your pond but it also provides a healthy aquatic environment through high oxygen transfer rates and the large volume of water circulation. Stainless steel, oil-free submersible motor is environmentally friendly. 5-year motor warranty. U.S.A. Available in longer power cords up to 250 feet, and with or without lights. Call your sales rep. HP: 1 1/2, Volts: 230, Cord Length (ft.): 100, Pattern: Angled, Dimensions W x H (ft.): 20 Dia. x 50, Water Depth Required (in.): 42, Amps: 10.6, GPM: 90 1 1/2 HP 230 Volt oil free motor Side jets angled spray pattern is 20ft. Designed for continuous operation No maintenance required Pond size Should Be 1/4 acre or larger Motor specs: 60 HZ, single phase, 10.6 Amps, 1780 Watts 5-year motor warranty UL listed CSA approved Easy installation Saltwater approved Includes 100-ft., 12 gauge submersible power cord with plug Light kits can be added later Requires two 20-lb. weights or concrete block for anchoring (weights not included) Requires two nylon ropes for anchoring (ropes not included

The Aerating Fountain creates a beautiful V pattern and is an ideal mix of aeration and aesthetics for larger ponds. U.S.A. Optional light kit and other cord lengths available; ask a sales rep. HP: 2, Volts: 240, Cord Length (ft.): 50, Pattern: V pattern, Dimensions W x H (ft.): 32 x 8, Water Depth Required (in.): 20, Amps: 10 Adds vital oxygen to pond while enhancing appearance Maintenance-free oil-filled motor is environmentally friendly ETL approved to UL and CSA standards Includes float, screen, mooring ropes, control panel and 50-ft. power cord

The 8400AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 6 lbs. of oxygen per hour. Draws 10 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 20in. of water to operate. ETL approved to UL and CSA standards. Bottom screen included for added protection. HP: 2, Volts: 240, Cord Length (ft.): 250, Water Depth Required (in.): 20, Amps: 10 Adds 6 lbs. of oxygen per hour Includes 3-pc.float, 250-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 8400AF with Bottom Screen Ships in 3 boxes U.S.A.

The 3.1AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 9 lbs. of oxygen per hour. Draws 10.7 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 24in. of water to operate. ETL approved to UL and CSA standards. Bottom screen included for added protection. HP: 3, Volts: 240, Cord Length (ft.): 200, Pattern: Crown, Water Depth Required (in.): 24, Amps: 10.7 Adds 9 lbs. of oxygen per hour Includes 3-pc. float, 200-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 3.1AF with Bottom Screen Ships in 3 boxes U.S.A.

The 3.1AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 9 lbs. of oxygen per hour. Draws 10.7 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 24in. of water to operate. ETL approved to UL and CSA standards. Bottom screen included for added protection. HP: 3, Volts: 240, Cord Length (ft.): 150, Pattern: Crown, Water Depth Required (in.): 24, Amps: 10.7 Adds 9 lbs. of oxygen per hour Includes 3-pc. float, 150-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 3.1AF with Bottom Screen Ships in 3 boxes U.S.A.

The Aerating Fountain creates a beautiful V-shaped pattern 8ft. tall x 26ft. wide. Great for medium to large ponds. Draws 5.7 Amps @ 240 Volts. Works in only 19in. of water. ETL approved to UL and CSA standards. U.S.A. HP: 1, Volts: 240, Cord Length (ft.): 250, Pattern: V shaped, Dimensions W x H (ft.): 26 x 8, Water Depth Required (in.): 19, Amps: 5.7 Provides water oxygen and agitation for a healthy pond Includes float, 250-ft. power cord, 50-ft. mooring ropes and control panel Unique water-deflecting nozzle design is clog-resistant 4-blade propeller for breathtaking patterns and high water flow Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Ships in 4 boxes

The Aerating Fountain includes 5 interchangeable nozzles for multiple fountain patterns, including the Sequoia, Linden, Cypress, Willow and Juniper. Draws 3.3 Amps @ 240 Volts. Requires only 17.5in. of water to operate. ETL approved to UL and CSA standards. U.S.A. HP: 3/4, Volts: 240, Cord Length (ft.): 250, Pattern: Varies, Water Depth Required (in.): 17.5, Amps: 3.3 Provides water oxygen and agitation for a healthy pond 5 beautiful patterns: Sequoia (7ft.H x 4ft.W geyser), Linden (6.5ft. x 3ft. inner tier and 3.5ft. x 14ft. outer tier), Cypress (6ft.H x 16ft.W 9-stream arch), Willow (4.5ft.H x 15ft.H V-shape) and Juniper (3ft.H x 20ft.W V-shape) Includes float, 250-ft. power cord, 50-ft. mooring ropes, rope weights, nozzles and control panel Unique water-deflecting nozzle design is clog-resistant 4-blade propeller for breathtaking patterns and high water flow Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Ships in 4 boxes

The 3.1AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 9 lbs. of oxygen per hour. Draws 10.7 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 24in. of water to operate. ETL approved to UL and CSA standards. Bottom screen included for added protection. HP: 3, Volts: 240, Cord Length (ft.): 100, Pattern: Crown, Water Depth Required (in.): 24, Amps: 10.7 Adds 9 lbs. of oxygen per hour Includes 3-pc. float, 100-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 3.1AF with Bottom Screen Ships in 3 boxes U.S.A.

The 3.1AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 9 lbs. of oxygen per hour. Draws 10.7 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 24in. of water to operate. ETL approved to UL and CSA standards. HP: 3, Volts: 240, Cord Length (ft.): 200, Pattern: Crown, Water Depth Required (in.): 24, Amps: 10.7 Adds 9 lbs. of oxygen per hour Includes 3-pc. float, 200-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 3.1AF Ships in 3 boxes U.S.A.

The 3.1AF High Oxygen Transfer Aerator produces a crown of water at the surface, adding 9 lbs. of oxygen per hour. Draws 10.7 Amps @ 240V. Includes 3-pc. float with three 50-ft. mooring ropes. Requires only 24in. of water to operate. ETL approved to UL and CSA standards. HP: 3, Volts: 240, Cord Length (ft.): 150, Pattern: Crown, Water Depth Required (in.): 24, Amps: 10.7 Adds 9 lbs. of oxygen per hour Includes 3-pc. float, 150-ft. power cord, three 50-ft. mooring ropes Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Model 3.1AF Ships in 2 boxes U.S.A.

The Aerating Fountain creates a beautiful V-shaped pattern 8ft. tall x 26ft. wide. Great for medium to large ponds. Draws 5.7 Amps @ 240 Volts. Works in only 19in. of water. ETL approved to UL and CSA standards. U.S.A. HP: 1, Volts: 240, Cord Length (ft.): 200, Pattern: V shaped, Dimensions W x H (ft.): 26 x 8, Water Depth Required (in.): 19, Amps: 5.7 Provides water oxygen and agitation for a healthy pond Requires only 19in. of water to operate Includes float, 200-ft. power cord, 50-ft. mooring ropes and control panel Unique water-deflecting nozzle design is clog-resistant 4-blade propeller for breathtaking patterns and high water flow Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Ships in 4 boxes